Four Tap T-Bar Series X.1 Kegerator - Homebrew Draught Pack
Or 4 interest-free payments of $497.25 with Afterpay. Zip also available.
Delivery Australia-wide: $89 for this item on its own (based on cart total).
Four Tap T-Bar Series X.1 Kegerator - Homebrew Draught Pack - None / None is backordered and will ship as soon as it is back in stock.
The Four Tap T-Bar Series X.1 Kegerator Homebrew Draught Pack is a complete four tap kegerator for homebrewers who pour from ball lock kegs.
Delivery and Shipping
Delivery and Shipping
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $16
- $100 to $299.99 – $26
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne, with a tracking link on every order. See estimated delivery times by state, or contact us if you need it urgently.
Four Tap T-Bar Series X.1 Kegerator - Homebrew Draught Pack
Or 4 interest-free payments of $497.25 with Afterpay. Zip also available.
Delivery Australia-wide: $89 for this item on its own (based on cart total).
Four Tap T-Bar Series X.1 Kegerator - Homebrew Draught Pack - None / None is backordered and will ship as soon as it is back in stock.
The Four Tap T-Bar Series X.1 Kegerator Homebrew Draught Pack is a complete four tap kegerator for homebrewers who pour from ball lock kegs. It pairs the Series X.1 base kegerator kit with a brushed stainless four tap T-bar font, four NukaTap stainless steel taps and a gas and liquid ball lock disconnect for every tap, so the small parts that often get missed on a first setup are already covered.
| Type | Four tap kegerator kit for homebrew ball lock kegs |
|---|---|
| Font | Brushed stainless steel four tap T-bar |
| Taps | 4 x NukaTap stainless steel taps |
| Disconnects | 4 x 8mm duotight ball lock gas (grey) and 4 x liquid (black) |
| Regulator | Type 30 CO2 regulator with 8mm duotight push-in outlet |
| Width x depth | 600mm x 650mm |
| Height | 840mm without castors; 890mm with castors (both exclude the guard rail, drip tray and font) |
| Not included | CO2 cylinder and kegs (unless added as options); wire shelf |
What's included
Series X.1 base kegerator kit:
- Type 30 CO2 regulator with 8mm duotight push-in outlet
- Black plastic wrap-around drip tray
- Set of 4 castor wheels with bolts (2 locking at the front, 2 free spinning)
- CO2 cylinder holder to suit a 2.6kg cylinder
- Chrome plated guard rail with rubber locking feet
- Carbonation chart sticker
Four tap T-bar font kit:
- Brushed stainless steel T-bar font with caps and a bolt dust cover
- 4 x Phillips head mounting bolts
- 4 x black plastic tap handles
- 4 x duotight compatible short shanks
- 4 x 6.5mm to 8mm duotight reducers
- 2 sets of 4mm ID x 8mm OD EVABarrier hose, for liquid and gas
- 3 x 8mm duotight tees for splitting the gas line
- 7 in 1 tap tool
Plus 4 x NukaTap stainless steel taps, 4 x 8mm duotight ball lock gas disconnects and 4 x 8mm duotight ball lock liquid disconnects. Items in the pack can't be removed or swapped.
Options
- Gas cylinder: none, a full 2.6kg CO2 cylinder or a full 6kg CO2 cylinder.
- 19L kegs: none, or one to four new 19L kegs.
How to use
- Set the kegerator on its castors and fit the guard rail and drip tray.
- Mount the T-bar font, then fit the shanks, taps and handles with the tap tool.
- Cut the liquid line to 1.5m to 2.1m per tap. Gas line can be any length; split it with the tees.
- Connect the regulator to your CO2 cylinder, set the pressure using the carbonation chart sticker and connect the disconnects to your kegs.
FAQ
What else do I need?
A 2.6kg or 6kg CO2 cylinder and 19L or 9.5L ball lock kegs, unless you add them as options. A 27mm compact ring spanner is a handy extra. Tell us what you already run and we will confirm what suits.
How long should the beer lines be?
Allow 1.5m to 2.1m of liquid line per tap. The gas line can be any length.
Can I change the tap handles or font?
Not in this pack, as the parts are fixed. For different handles, decal holders or a different font, use the Series X.1 Kegerator Builder.
How big is it?
600mm wide, 650mm deep and 890mm high on its castors, plus the height of the font, drip tray and guard rail.
What should I use to keep it clean?
Homebrewers usually keep a keg cleaner, a no-rinse sanitiser, a sanitiser spray for duotight fittings and a carbonation cap for flushing beer lines.
Compare models in our kegerator range, see the full Series X kegerator collection, or add CO2 cylinders and regulators.
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $16
- $100 to $299.99 – $26
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne. Your order might ship from either warehouse, or from both, as different stock is held in different warehouses. For our courier and Parcel Post deliveries, estimated times from dispatch, in working days, from our Brisbane warehouse are as follows:
QLD Metro: 1 – 2 days
QLD North: 2 – 4 days
QLD Country: 2 – 6 days
SA Metro: 3 – 5 days
SA Country: 4 – 8 days
NSW Metro: 2 – 3 days
NSW Country: 2 – 7 days
ACT: 2 – 4 days
VIC Metro: 3 – 5 days
VIC Country: 3 – 7 days
TAS: 5 – 10 days
NT Metro: 3 – 6 days
NT Country: 5 – 10 days
WA: 5 – 10 days
For our Express Post deliveries:
ALL Metro: 1 day
ALL Country: 2 – 3 days
Please note, these are estimated shipping times. Weather, human error and other unforeseen circumstances can slow down your order. You will get an online tracking link to follow the progress of your order. If you need your order urgently, we encourage you to select the Express Post option at checkout.
If you suspect any problems or your order has not arrived by the ETA date, please contact us so we can follow it up. If you would like more clarity around dispatch times, including ETAs for goods shipping from our Melbourne warehouse, please contact us.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AfterPay and ZipPay Available
