Series X.1 Kegerator Builder
Or 4 interest-free payments of $357.25 with Afterpay. Zip also available.
Delivery Australia-wide: $89 for this item on its own (based on cart total).
Series X.1 Kegerator Builder - 1 Tap / 1 Tap Totem Font Kit with NukaTap SS / 1 Tap 8mm duotight x Ball Lock Kit (Liquid/Gas) is backordered and will ship as soon as it is back in stock.
The Series X.1 Kegerator Builder lets you put together a complete Series X.1 keg fridge with 1 to 4 taps, the font tower you prefer and couplers to suit your kegs.
Delivery and Shipping
Delivery and Shipping
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $16
- $100 to $299.99 – $26
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne, with a tracking link on every order. See estimated delivery times by state, or contact us if you need it urgently.
Series X.1 Kegerator Builder
Or 4 interest-free payments of $357.25 with Afterpay. Zip also available.
Delivery Australia-wide: $89 for this item on its own (based on cart total).
Series X.1 Kegerator Builder - 1 Tap / 1 Tap Totem Font Kit with NukaTap SS / 1 Tap 8mm duotight x Ball Lock Kit (Liquid/Gas) is backordered and will ship as soon as it is back in stock.
The Series X.1 Kegerator Builder lets you put together a complete Series X.1 keg fridge with 1 to 4 taps, the font tower you prefer and couplers to suit your kegs. The fridge holds up to four 19L corny kegs and every setup comes with an MK5 Type 30 CO2 regulator, so it suits homebrewers and anyone pouring commercial kegs at home.
| Type | Freestanding kegerator (keg fridge) on castors |
|---|---|
| Keg capacity | Up to 4 x 19L corny kegs |
| Taps | 1, 2, 3 or 4 NukaTap stainless steel taps |
| Regulator | MK5 Type 30 CO2 regulator included |
| Width x depth | 600mm x 650mm |
| Height | 840mm (excluding castors, guard rail, drip tray and font); 890mm including castors |
| Refrigerant | R600a |
| Not included | CO2 gas cylinder |
Options
- How many taps: pick 1 to 4 taps, then choose a font and coupler set with the same tap count.
- Font tower: a straight Totem font, the black Phantom Totem with NukaTap Punisher or Bomber taps, a Super Slim T-Bar (pre-assembled), a Modular 76 T-Bar, or for 4 taps the FatBoy T-Bar. All use NukaTap stainless steel taps.
- Coupling type: 8mm duotight ball lock disconnects (liquid and gas) for homebrew corny kegs, or A-Type or D-Type stainless couplers for commercial kegs. An A and D Type combo is also offered.
How it works
The Series X.1 base unit keeps your kegs cold, and the font sits on top with the taps. CO2 from your cylinder runs through the included regulator to push beer from each keg up to its tap. The fridge uses R600a refrigerant, which can make some unusual sounds while running. This is normal.
FAQ
How many kegs fit in the Series X.1?
Up to four 19L corny kegs.
Should I choose ball lock or A-Type/D-Type couplers?
Ball lock disconnects suit homebrew corny kegs. A-Type and D-Type couplers suit commercial kegs, so match the coupler to the kegs you plan to pour.
Is a CO2 cylinder included?
No. The MK5 regulator is included, but the CO2 gas cylinder is sold separately.
How big is it?
600mm wide, 650mm deep and 890mm high on its castors, before the font is added.
What else do I need?
A CO2 cylinder and your kegs. Tell us what you already run and we will confirm what suits.
Compare models in our kegerator range, see the full Series X kegerator collection, or pick up CO2 cylinders and regulators.
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $16
- $100 to $299.99 – $26
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne. Your order might ship from either warehouse, or from both, as different stock is held in different warehouses. For our courier and Parcel Post deliveries, estimated times from dispatch, in working days, from our Brisbane warehouse are as follows:
QLD Metro: 1 – 2 days
QLD North: 2 – 4 days
QLD Country: 2 – 6 days
SA Metro: 3 – 5 days
SA Country: 4 – 8 days
NSW Metro: 2 – 3 days
NSW Country: 2 – 7 days
ACT: 2 – 4 days
VIC Metro: 3 – 5 days
VIC Country: 3 – 7 days
TAS: 5 – 10 days
NT Metro: 3 – 6 days
NT Country: 5 – 10 days
WA: 5 – 10 days
For our Express Post deliveries:
ALL Metro: 1 day
ALL Country: 2 – 3 days
Please note, these are estimated shipping times. Weather, human error and other unforeseen circumstances can slow down your order. You will get an online tracking link to follow the progress of your order. If you need your order urgently, we encourage you to select the Express Post option at checkout.
If you suspect any problems or your order has not arrived by the ETA date, please contact us so we can follow it up. If you would like more clarity around dispatch times, including ETAs for goods shipping from our Melbourne warehouse, please contact us.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AfterPay and ZipPay Available
