The Early Pour: Black Friday deals are on

Undercover Build-In Kegerator - Triple Tap

Regular price $2899

Buy now, pay later with Zip.

Delivery Australia-wide: $89

Tracked shipping from Brisbane or Melbourne.

The Undercover Build-In Kegerator, Triple Tap is a 170L keg fridge made to go inside cabinetry. Dual internal fans push heat out the front, so you can build right up to it on both sides, in an indoor bar, outdoor kitchen or under bench run, and pour three beers on tap.

Delivery and Shipping

Shipping is calculated on your cart total, Australia wide:

  • Under $100 – $16
  • $100 to $299.99 – $26
  • $300 to $999.99 – $39
  • $1,000 and over – $89

Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.

We ship from our warehouses in Brisbane and Melbourne, with a tracking link on every order. See estimated delivery times by state, or contact us if you need it urgently.

The Undercover Build-In Kegerator, Triple Tap is a 170L keg fridge made to go inside cabinetry. Dual internal fans push heat out the front, so you can build right up to it on both sides, in an indoor bar, outdoor kitchen or under bench run, and pour three beers on tap.

Type Built-in, front venting kegerator
Taps 3, with your choice of beer tower and tap setup
Internal capacity 170L
Keg capacity 4 x 19L kegs; or 1 x 50L or 30L wide commercial keg; or 3 x 20L commercial kegs; or 1 x 20L + 1 x 30L tall commercial keg
Size 600mm W x 865mm H (without castors) x 600mm D (640mm with handle and rear fittings)
Features Dual internal fans, automatic interior light, black and stainless steel interior
Castors Takes small or large castors (not included)

How it works

Most kegerators shed heat through the sides and need a gap left around them. This one pulls air through the cabinet with internal fans and pushes it out the front, which is what lets it sit flush in a tight cupboard. It is sold as a kit: the fridge, your pick of the beer tower (font) and tap setups we stock, and the push-in parts to connect them.

How to use

  1. Plan where the CO2 cylinder goes: it must stand upright and stay reachable for swaps. Drilling through to the neighbouring cupboard is usually the tidiest answer.
  2. Leave enough slack in the gas line to pull the fridge out.
  3. Fit the tower and taps, connect the push-in lines and your kegs.
  4. Set the temperature and serving pressure, then pour.
FAQ

Can it be built in with no side gap?

Yes. It vents out the front, so joinery can go hard up against both sides.

How many kegs fit?

Four 19L kegs, one 50L or 30L wide commercial keg, three 20L commercial kegs, or a 20L and a 30L tall commercial keg together.

Is a CO2 cylinder included?

No. Plan its position before installing, as it must stand upright.

Fewer taps?

See the double tap and single tap versions.

Compare every model in our kegerator buying guide.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa
  • WeChat Pay

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

AfterPay and ZipPay Available