Series X.1 Kegerator Triple Tap 3x Taps
4 payments of $392.25 with Afterpay or Zip
Delivery Australia-wide: $89
Series X.1 Kegerator Triple Tap 3x Taps - FREE 12 Month Warranty is backordered and will ship as soon as it is back in stock.
Tracked shipping from Brisbane or Melbourne.
The Series X.1 Triple Tap Kegerator is a three tap keg fridge: a Series X.1 cabinet with an MK4 regulator, a brushed stainless triple font and three NukaTap stainless taps, ready for your own kegs and CO2 cylinder. Three taps is the most popular home setup, enough for a lager, an ale and something on rotation.
Delivery and Shipping
Delivery and Shipping
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $16
- $100 to $299.99 – $26
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne, with a tracking link on every order. See estimated delivery times by state, or contact us if you need it urgently.
4 payments of $392.25 with Afterpay or Zip
Delivery Australia-wide: $89
Series X.1 Kegerator Triple Tap 3x Taps - FREE 12 Month Warranty is backordered and will ship as soon as it is back in stock.
The Series X.1 Triple Tap Kegerator is a three tap keg fridge: a Series X.1 cabinet with an MK4 regulator, a brushed stainless triple font and three NukaTap stainless taps, ready for your own kegs and CO2 cylinder. Three taps is the most popular home setup, enough for a lager, an ale and something on rotation.
| Type | Freestanding kegerator (keg fridge) for indoor use |
|---|---|
| Taps | 3 x NukaTap stainless steel forward sealing taps |
| Keg capacity | Up to 4 x 19L ball lock kegs, or 1 x 50L commercial keg |
| Gas | MK4 CO2 regulator; bracket for a 2.6kg CO2 cylinder (cylinder not included) |
| Lines and fittings | EVABarrier double walled beer and gas line, duotight push-in fittings |
| Temperature | -5 to 28°C (cools only) |
| Size | 600mm W x 650mm D (820mm with CO2 bracket) x 840mm H (890mm on castors) |
| Clearance | 100mm on the left, right and back |
What's included
- Series X.1 kegerator fridge with font fan switch
- MK4 CO2 regulator
- Honeycomb reinforced drip tray, stainless guard rail and font plug
- Four castor wheels (two locking)
- CO2 cylinder bracket for a 2.6kg cylinder
- Triple tap brushed stainless font with 3 x duotight short shanks, reducers and black tap handles
- 3 x precut 4mm ID EVABarrier beer lines, extended 5mm ID EVABarrier gas line and 2 x duotight 8mm tees
- 3 x NukaTap stainless steel forward sealing taps
Kegs, disconnects and CO2 are not included. The 3 tap Premium Bundle adds three kegs, a 2.6kg cylinder and disconnects.
How to use
- Stand the kegerator upright for a few hours after delivery, then plug it in and set the temperature.
- Fit the font, connect the beer lines and split the gas line with the tees.
- Screw the regulator onto a CO2 cylinder and seat it in the rear bracket.
- Connect your kegs with ball lock disconnects and set your carbonation pressure.
FAQ
How many kegs fit?
Up to four 19L ball lock kegs, so a fourth can carbonate while three pour.
What else do I need to start pouring?
Kegs, ball lock disconnects and a CO2 cylinder. The 2.6kg cylinder fits the rear bracket.
Can all three taps run at different pressures?
Not with the single output regulator supplied. A dual pressure regulator lets you run a higher carbonation drink, such as soda water or cider, alongside beer.
Can it go outside?
It is designed for indoor use and only cools. Leave 100mm clear on the left, right and back.
Compare every model in our kegerator buying guide, and add kegs and CO2 and regulators.
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $16
- $100 to $299.99 – $26
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne. Your order might ship from either warehouse, or from both, as different stock is held in different warehouses. For our courier and Parcel Post deliveries, estimated times from dispatch, in working days, from our Brisbane warehouse are as follows:
QLD Metro: 1 – 2 days
QLD North: 2 – 4 days
QLD Country: 2 – 6 days
SA Metro: 3 – 5 days
SA Country: 4 – 8 days
NSW Metro: 2 – 3 days
NSW Country: 2 – 7 days
ACT: 2 – 4 days
VIC Metro: 3 – 5 days
VIC Country: 3 – 7 days
TAS: 5 – 10 days
NT Metro: 3 – 6 days
NT Country: 5 – 10 days
WA: 5 – 10 days
For our Express Post deliveries:
ALL Metro: 1 day
ALL Country: 2 – 3 days
Please note, these are estimated shipping times. Weather, human error and other unforeseen circumstances can slow down your order. You will get an online tracking link to follow the progress of your order. If you need your order urgently, we encourage you to select the Express Post option at checkout.
If you suspect any problems or your order has not arrived by the ETA date, please contact us so we can follow it up. If you would like more clarity around dispatch times, including ETAs for goods shipping from our Melbourne warehouse, please contact us.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AfterPay and ZipPay Available





