Heating Element with Power Cord 2200 Watt Weld-Less Heating Element

2200 Watt Weld-Less Heating Element (304 Stainless Steel)

These weldless elements are designed to fit a 32mm hole in the wall of your brewing vessel or boiler. It comes with an IEC Power Cord to run. Supplying power from an IEC cord allows the unit to be used in a smaller hole than if the cord was hard wired.

Powerful enough to use on 50-100L boilers and vessels. Multiple elements may be required for larger volumes and depending on what temperature you are trying to achieve.

When inserted into your vessel, this element will protrude 300mm. Please ensure you have enough room in your vessel to house this element prior to drilling.

Attachment guide: Element goes inside vessel with washer attached, then push through the electrical cord through the 32mm hole. Then pull over large hex nut over the electrical cord and tighten from the outside.