duotight 8mm (5/16) x Ball Lock Disconnect - Liquid (Black + Yellow)
duotight 8mm (5/16) x Ball Lock Disconnect - Liquid (Black + Yellow) is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $14
- $100 to $299.99 – $24
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne. Your order might ship from either warehouse, or from both, as different stock is held in different warehouses. For our courier and Parcel Post deliveries, estimated times from dispatch, in working days, from our Brisbane warehouse are as follows:
QLD Metro: 1 – 2 days
QLD North: 2 – 4 days
QLD Country: 2 – 6 days
SA Metro: 3 – 5 days
SA Country: 4 – 8 days
NSW Metro: 2 – 3 days
NSW Country: 2 – 7 days
ACT: 2 – 4 days
VIC Metro: 3 – 5 days
VIC Country: 3 – 7 days
TAS: 5 – 10 days
NT Metro: 3 – 6 days
NT Country: 5 – 10 days
WA: 5 – 10 days
For our Express Post deliveries:
ALL Metro: 1 day
ALL Country: 2 – 3 days
Please note, these are estimated shipping times. Weather, human error and other unforeseen circumstances can slow down your order. You will get an online tracking link to follow the progress of your order. If you need your order urgently, we encourage you to select the Express Post option at checkout.
If you suspect any problems or your order has not arrived by the ETA date, please contact us so we can follow it up. If you would like more clarity around dispatch times, including ETAs for goods shipping from our Melbourne warehouse, please contact us.
duotight 8mm (5/16) x Ball Lock Disconnect - Liquid (Black + Yellow)
duotight 8mm (5/16) x Ball Lock Disconnect - Liquid (Black + Yellow) is backordered and will ship as soon as it is back in stock.
This is the liquid side ball lock disconnect from the Generation 2 duotight range, with the duotight fitting built into the body. Your 8mm beer line pushes straight into the back of it, so there is no barb, no clamp and no threaded adaptor in between. The black collet and yellow body mark it as liquid.
The body is polyketone rather than acetal, with a stainless spring and stainless ball bearings, and EPDM and PP/EPDM seals. That combination stands up to the chemicals you actually use, including phosphoric sanitisers, caustic soda, acetic acid and peroxide, and it holds its performance better in the cold and under UV than acetal does. The poppet is overmoulded, so you can couple and uncouple at up to 150psi without blowing an o-ring out. The fitting itself is rated above 300psi.
The cap seals by hand and comes apart by hand, so clearing hop debris out of a poppet needs no screwdriver and no spanner. The small body also lets kegs sit closer together, and ball lock kegs can be stacked two high with the lines still connected. Gauge depth indicators on the collet show you when the line is fully seated.
Line compatibility
- EVABarrier 4mm ID x 8mm OD
- EVABarrier 5mm ID x 8mm OD
- Red EVABarrier 5mm ID x 8mm OD
- Black Lightshield EVABarrier 4mm ID x 8mm OD
- Not compatible with 6.3mm ID x 9.5mm OD line
The duotight swivel elbow is sold separately if you need the line to turn hard against a keg post.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AfterPay and ZipPay Available
