60L Vulcan Conical Kegmenter - Pressure Fermenter Starter Kit
Or 4 interest-free payments of $219.75 with Afterpay. Zip also available.
Delivery Australia-wide: $39 for this item on its own (based on cart total).
60L Vulcan Conical Kegmenter - Pressure Fermenter Starter Kit - None is backordered and will ship as soon as it is back in stock.
The 60L Vulcan Conical Kegmenter is a heavy duty stainless steel conical fermenter built like a commercial keg, with a deep 90 degree cone and a 3 inch TC dump valve at the base.
Delivery and Shipping
Delivery and Shipping
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $16
- $100 to $299.99 – $26
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne, with a tracking link on every order. See estimated delivery times by state, or contact us if you need it urgently.
60L Vulcan Conical Kegmenter - Pressure Fermenter Starter Kit
Or 4 interest-free payments of $219.75 with Afterpay. Zip also available.
Delivery Australia-wide: $39 for this item on its own (based on cart total).
60L Vulcan Conical Kegmenter - Pressure Fermenter Starter Kit - None is backordered and will ship as soon as it is back in stock.
The 60L Vulcan Conical Kegmenter is a heavy duty stainless steel conical fermenter built like a commercial keg, with a deep 90 degree cone and a 3 inch TC dump valve at the base. This starter kit adds a pressure lid with floating dip tube and a collection container, so it suits brewers who want to pressure ferment and clean hard without worrying about scratching plastic.
| Type | Conical pressure fermenter (Conical Kegmenter) |
|---|---|
| Volume | 60L |
| Material | 304 stainless steel, roughly 1.8 to 2.14mm thick, commercial keg finish |
| Dimensions | 1060mm high, 405mm diameter |
| Cone and outlet | 90 degree cone with 3 inch TC dump valve |
| Lid | Pressure lid with floating dip tube, yellow and red carb caps and a 45psi green PRV |
| Collection container | 600mL with a 25psi red PRV |
| Stand | Triple suspension rubberised stand |
How it works
The Vulcan sits between a standard Kegmenter and a premium conical. The steel is finished to the same standard as a 50L commercial keg rather than polished to a mirror, which makes it tough enough for heat and strong commercial cleaning chemicals; you can even boil in it. The floating dip tube draws clear beer from near the surface, and the 3 inch dump valve clears trub from the bottom of the cone. The Vulcan has a clean outer skin with no extra side ports, so there is less to clean. It is sized to fit a full size RAPT fermentation chamber.
Options
- Spunding valve: none, a Compact BlowTie spunding valve or a Large Dial BlowTie spunding valve. You need one of these to ferment under pressure.
How to use
- Clean with a brewery wash such as PBW, then sanitise with a phosphoric acid sanitiser.
- Fill with wort, pitch your yeast and fit the pressure lid.
- Fit a BlowTie spunding valve and set your fermentation pressure.
- Dump trub through the 3 inch valve as needed, then transfer the finished beer through the floating dip tube.
FAQ
Do I need a spunding valve?
Yes, if you want to ferment under pressure. Add a Compact or Large Dial BlowTie spunding valve in the options above.
What's the difference between the Vulcan and Romulan?
The Romulan adds a 2 inch TC side port for a heating element and a 1.5 inch TC port on the cone for a rotating racking arm. The Vulcan has no extra ports, so the outside is plain and quicker to clean.
Will it fit in a fermentation chamber?
Yes. At 1060mm tall and 405mm wide it is designed to fit a full size RAPT fermentation chamber.
How should I clean it?
Use PBW for everyday cleaning, caustic soda for a deep clean and a phosphoric acid sanitiser. Never use bleach or chlorinated TSP (pink powder), which pits stainless steel and is not covered by warranty.
Pair it with a RAPT fermentation chamber and the StellarClean PBW brewery wash, or see all fermenters and brewing gear.
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $16
- $100 to $299.99 – $26
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne. Your order might ship from either warehouse, or from both, as different stock is held in different warehouses. For our courier and Parcel Post deliveries, estimated times from dispatch, in working days, from our Brisbane warehouse are as follows:
QLD Metro: 1 – 2 days
QLD North: 2 – 4 days
QLD Country: 2 – 6 days
SA Metro: 3 – 5 days
SA Country: 4 – 8 days
NSW Metro: 2 – 3 days
NSW Country: 2 – 7 days
ACT: 2 – 4 days
VIC Metro: 3 – 5 days
VIC Country: 3 – 7 days
TAS: 5 – 10 days
NT Metro: 3 – 6 days
NT Country: 5 – 10 days
WA: 5 – 10 days
For our Express Post deliveries:
ALL Metro: 1 day
ALL Country: 2 – 3 days
Please note, these are estimated shipping times. Weather, human error and other unforeseen circumstances can slow down your order. You will get an online tracking link to follow the progress of your order. If you need your order urgently, we encourage you to select the Express Post option at checkout.
If you suspect any problems or your order has not arrived by the ETA date, please contact us so we can follow it up. If you would like more clarity around dispatch times, including ETAs for goods shipping from our Melbourne warehouse, please contact us.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AfterPay and ZipPay Available
