5 Micron Polyspun Sediment Water Filter Cartridge - 10 inch x 2.5 inch
5 Micron Polyspun Sediment Water Filter Cartridge - 10 inch x 2.5 inch is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
Free Shipping Australia Wide when you spend $300 or more, otherwise it's $14 flat rate.
We have four warehouses in Brisbane, Sydney, Melbourne and Launceston. Your order might ship from any of these warehouse, or from a combination of these warehouses as different stock is located in different warehouses. For our free, flat-rate and Parcel Post deliveries, estimated time from dispatch based on working days from our main warehouse in Brisbane are as follows:
QLD Metro: 1 – 2 days
QLD North: 2 – 4 days
QLD Country: 2 – 6 days
SA Metro: 3 – 5 days
SA Country: 4 – 8 days
NSW Metro: 2 – 3 days
NSW Country: 2 – 7 days
ACT: 2 – 4 days
VIC Metro: 3 – 5 days
VIC Country: 3 – 7 days
TAS: 5 – 10 days
NT Metro: 3 – 6 days
NT Country: 5 – 10 days
WA: 5 – 10 days
For our Express Post deliveries:
ALL Metro: 1 day
ALL Country: 2 – 3 days
Please note, these are estimated shipping times. Weather, human error and other unforeseen circumstances can slow down your order. You will get an online tracking link to follow the progress of your order. If you need your order urgently, we encourage you to select the Express Post option at checkout.
If you suspect any problems or your order has not arrived by the ETA date, please contact us so we can follow it up. If you would like some more clarity around dispatch times including ETAs of goods shipping from our Sydney, Melbourne or Launceston warehouses, please contact us.
5 Micron Polyspun Sediment Water Filter Cartridge - 10 inch x 2.5 inch
5 Micron Polyspun Sediment Water Filter Cartridge - 10 inch x 2.5 inch is backordered and will ship as soon as it is back in stock.
First-stage sediment cartridge for any standard 10" x 2.5" filter housing. Catches grit, rust, sand and suspended particles before they reach your carbon block, RO membrane or appliance.
Polyspun is the material to use here. Unlike foam or wound-string cartridges it doesn't harbour bacteria to the same degree, and it gives high flow with very little pressure drop — which matters if you're feeding a carbonation unit that needs its inlet pressure held above the gas pressure.
Specifications
- 5 micron nominal filtration
- Standard 10" x 2.5" — fits common twin and single housings
- Polyspun polypropylene construction
When to replace
Typically every six to twelve months. If you notice flow dropping off at the tap, the sediment stage is usually the culprit — it does the dirty work so the carbon stage doesn't have to.
Always run this as your first stage, ahead of any carbon block or RO membrane.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AfterPay and ZipPay Available
