30L Romulan Conical Kegmenter - Pressure Fermenter Starter Kit - 2' TC Port + 1.5' TC Port
Or 4 interest-free payments of $182.25 with Afterpay. Zip also available.
Delivery Australia-wide: $39 for this item on its own (based on cart total).
30L Romulan Conical Kegmenter - Pressure Fermenter Starter Kit - 2' TC Port + 1.5' TC Port - None / None / None is backordered and will ship as soon as it is back in stock.
The 30L Romulan Conical Kegmenter is a stainless steel conical pressure fermenter built to the same toughness as a commercial keg.
Delivery and Shipping
Delivery and Shipping
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $16
- $100 to $299.99 – $26
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne, with a tracking link on every order. See estimated delivery times by state, or contact us if you need it urgently.
30L Romulan Conical Kegmenter - Pressure Fermenter Starter Kit - 2&...
Or 4 interest-free payments of $182.25 with Afterpay. Zip also available.
Delivery Australia-wide: $39 for this item on its own (based on cart total).
30L Romulan Conical Kegmenter - Pressure Fermenter Starter Kit - 2' TC Port + 1.5' TC Port - None / None / None is backordered and will ship as soon as it is back in stock.
The 30L Romulan Conical Kegmenter is a stainless steel conical pressure fermenter built to the same toughness as a commercial keg. It has a deep 90 degree cone with a 3 inch TC dump valve, a 2 inch TC side port for heating and a 1.5 inch TC port on the cone for a racking arm, so it suits brewers who want a heavy duty vessel they can heat, pressurise and clean hard.
| Type | Conical pressure fermenter (Conical Kegmenter, Romulan model) |
|---|---|
| Volume | 30L |
| Material | 304 stainless steel, roughly 2mm thick |
| Height | 800mm |
| Diameter | 440mm including the 2 inch TC port |
| Cone and dump | 90 degree cone with 3 inch TC dump valve |
| Ports | 2 inch TC side port; 1.5 inch TC port on the cone |
| Stand | Triple suspension rubberised stand |
What's included
- 30L Romulan Conical Kegmenter with 3 inch TC dump valve
- Pressure fermenter lid with floating dip tube
- Carbonation caps and a 45psi pressure relief valve
- 600mL collection container with a 25psi pressure relief valve
- Rubberised stand
How it works
The 2 inch TC side port takes a Warming Wizard wand for gentle heating, or a 3600W element if you want to boil in the vessel. The 1.5 inch TC port on the cone is for a rotating racking arm, and the 3 inch dump valve at the bottom lets you drop yeast and trub. Because it is all stainless, you can clean it with heat and strong commercial grade chemicals, which is not an option with PET fermenters. The inside is finished to the standard of a commercial keg rather than mirror polished.
The Romulan differs from the Vulcan Conical Kegmenter by having the extra 2 inch and 1.5 inch ports. The Vulcan has a plain outer shell with no extra ports.
Options
- Spunding valve: none, a Compact BlowTie or a Large Dial BlowTie spunding valve for setting fermentation pressure.
- Racking arm: none, or a 1.5 inch TC rotating racking arm for the cone port.
- Warming Wizard: none, or a Warming Wizard wand (2 inch TC, 125W) for the side port.
FAQ
Can I boil in it?
Yes. Fit a 3600W element in the 2 inch TC port and you can boil inside the vessel.
How do I control temperature?
Glycol cooling with a Temp Twister suits it best. The 2 inch TC port widens it to 440mm, which makes a fermentation chamber a tighter fit.
What should I clean it with?
A brewery wash such as StellarClean PBW for normal cleaning, StellarSoda for a deep clean and StellarSan to sanitise. Never use bleach or chlorinated TSP (pink powder), as it causes pitting in stainless steel and is not covered by warranty.
What else do I need?
A CO2 supply if you plan to pressure transfer, and a spunding valve if you didn't add one. Tell us what you already run and we will confirm what suits.
See our Warming Wizard wand, StellarClean PBW, or the full range of fermenters and brewing gear.
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $16
- $100 to $299.99 – $26
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne. Your order might ship from either warehouse, or from both, as different stock is held in different warehouses. For our courier and Parcel Post deliveries, estimated times from dispatch, in working days, from our Brisbane warehouse are as follows:
QLD Metro: 1 – 2 days
QLD North: 2 – 4 days
QLD Country: 2 – 6 days
SA Metro: 3 – 5 days
SA Country: 4 – 8 days
NSW Metro: 2 – 3 days
NSW Country: 2 – 7 days
ACT: 2 – 4 days
VIC Metro: 3 – 5 days
VIC Country: 3 – 7 days
TAS: 5 – 10 days
NT Metro: 3 – 6 days
NT Country: 5 – 10 days
WA: 5 – 10 days
For our Express Post deliveries:
ALL Metro: 1 day
ALL Country: 2 – 3 days
Please note, these are estimated shipping times. Weather, human error and other unforeseen circumstances can slow down your order. You will get an online tracking link to follow the progress of your order. If you need your order urgently, we encourage you to select the Express Post option at checkout.
If you suspect any problems or your order has not arrived by the ETA date, please contact us so we can follow it up. If you would like more clarity around dispatch times, including ETAs for goods shipping from our Melbourne warehouse, please contact us.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AfterPay and ZipPay Available
