30L FermZilla All Rounder Easy-Grip Pressure Fermenter Starter Kit
4 payments of $64.75 with Afterpay or Zip
Delivery Australia-wide: $26
30L FermZilla All Rounder Easy-Grip Pressure Fermenter Starter Kit is backordered and will ship as soon as it is back in stock.
Tracked shipping from Brisbane or Melbourne.
The 30L FermZilla All Rounder Starter Kit is a PET pressure fermenter set up in one box, so you can ferment under pressure and transfer beer to a keg, bottle or can without picking up oxygen.
Delivery and Shipping
Delivery and Shipping
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $16
- $100 to $299.99 – $26
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne, with a tracking link on every order. See estimated delivery times by state, or contact us if you need it urgently.
30L FermZilla All Rounder Easy-Grip Pressure Fermenter Starter Kit
4 payments of $64.75 with Afterpay or Zip
Delivery Australia-wide: $26
30L FermZilla All Rounder Easy-Grip Pressure Fermenter Starter Kit is backordered and will ship as soon as it is back in stock.
The 30L FermZilla All Rounder Starter Kit is a PET pressure fermenter set up in one box, so you can ferment under pressure and transfer beer to a keg, bottle or can without picking up oxygen. It includes the Easy-Grip lid ring, reinforced hex base, gas and liquid carbonation caps, a weighted floating dip tube and a BlowTie spunding valve with gauge.
| Capacity | 30L |
|---|---|
| Material | PET |
| Pressure | Ferment under pressure with the BlowTie spunding valve (0–15psi gauge) |
| Base | Reinforced hex base, pre-attached with 24 sticky dots |
| Best for | New pressure brewers, and anyone wanting closed transfers to 19L or 9.5L kegs |
What's included
- 1 x 30L All Rounder FermZilla base kit with Easy-Grip threaded lid ring
- 1 x FermZilla All Rounder hex base with 24 sticky dots (pre-attached)
- 1 x red carbonation cap (gas in)
- 1 x yellow carbonation cap (liquid out)
- 1 x yellow weighted stainless float with silicone dip tube and mesh filter (cut to the depth that suits what you're fermenting)
- 1 x integrated gauge BlowTie kit (0–15psi)
The items above can't be removed or swapped within this kit. A CO2 cylinder is recommended so you can transfer to a keg, bottle or can, or dispense straight from the fermenter.
How to use
- Read the instructions in full before use.
- Pressure test with water first: fill with water, apply at least 15psi and check all caps and threads for leaks.
- Cut the dip tube to suit, fill with your wort, fit the lid and set the BlowTie to your fermenting pressure.
- When fermentation finishes, push the beer out through the liquid cap into a keg with CO2.
- Keep the fermenter out of direct sunlight, which degrades PET.
FAQ
Why ferment under pressure?
It lets you transfer the beer with pressure instead of syphoning, which reduces oxygen pick-up. The best result is a closed transfer into a 19L or 9.5L stainless keg with Low2 O-rings.
All Rounder or conical FermZilla?
The All Rounder is quicker to clean and simpler to use, which suits busy brewers. It isn't better than the conical, just the easiest all-round option.
It arrived with small dents. Is that a problem?
Small dimples from shipping are normal for thin-walled blow-moulded vessels and push out with positive pressure. Only replace it if you see white stress marks or damaged plastic.
See all fermenters and brewing gear, kegs and couplers, and our guide to brewing beer at home.
Shipping is calculated on your cart total, Australia wide:
- Under $100 – $16
- $100 to $299.99 – $26
- $300 to $999.99 – $39
- $1,000 and over – $89
Signature on delivery is available for an extra $3. Australia Post options are also shown at checkout where available.
We ship from our warehouses in Brisbane and Melbourne. Your order might ship from either warehouse, or from both, as different stock is held in different warehouses. For our courier and Parcel Post deliveries, estimated times from dispatch, in working days, from our Brisbane warehouse are as follows:
QLD Metro: 1 – 2 days
QLD North: 2 – 4 days
QLD Country: 2 – 6 days
SA Metro: 3 – 5 days
SA Country: 4 – 8 days
NSW Metro: 2 – 3 days
NSW Country: 2 – 7 days
ACT: 2 – 4 days
VIC Metro: 3 – 5 days
VIC Country: 3 – 7 days
TAS: 5 – 10 days
NT Metro: 3 – 6 days
NT Country: 5 – 10 days
WA: 5 – 10 days
For our Express Post deliveries:
ALL Metro: 1 day
ALL Country: 2 – 3 days
Please note, these are estimated shipping times. Weather, human error and other unforeseen circumstances can slow down your order. You will get an online tracking link to follow the progress of your order. If you need your order urgently, we encourage you to select the Express Post option at checkout.
If you suspect any problems or your order has not arrived by the ETA date, please contact us so we can follow it up. If you would like more clarity around dispatch times, including ETAs for goods shipping from our Melbourne warehouse, please contact us.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AfterPay and ZipPay Available
