Skip to content

Kegmaster Series 4 Kegerator Single Tap A-Type & D-Type Bundle


No more cleaning bottles ever again! Grab a Kegerator and set up your own bar.

The Kegmaster Series 4 is the ideal solution for a simple short draw system for the home bar, small restaurant, cafes and bars.

Our Stainless Steel Single Intertap Kegmaster is recommended for those wanting to dispense one commercial 50L Keg. We'd advise to research what type of beer you're going to purchase as they will be a certain type of keg. Most commonly there are A-Type Kegs and D-Type Kegs. A general way of looking at it in Australia is Lion Nathan (Tooheys) and most modern craft brewery kegs have A-Type kegs, and CUB (Carlton Draught) have D-type kegs. Please see the bottom of this listing for an idea of the brands associated with each fitting.

In this bundle we provide both A-Type and D-Type Kegs allowing you to switch between the two. You will also be able to with to 19L Ball Lock Kegs and Mini Kegs if you wish.

Improved Features

  • New and improved inbuilt font fan with toggle on/off function
  • State of the art beer taps
  • New circuit boards with temperature control, calibration and on-board memory functions as standard
  • Improved guard rail system to ensure your beer never slides off accidentally 
  • State of the art Stainless Intertap Taps as standard
  • Increased compressor power while being approximately 20% more electrically efficient
  • Improved drip tray & rear cylinder bracket holder
  • Glass holder and wire shelf if you wish to convert it back to a normal fridge

This bundle includes:

  • 1x Kegmaster Series 4 Kegerator
  • A-Type Coupler
  • D-Type Coupler
  • 2x Gas Ball Lock Post w.5/8" Thread (there is a black silicone washer inside, which will need to be removed to make a seal with the duck bill gas one way valve)
  • 2x Liquid Ball Lock Posts w.5/8" Thread
  • 1x Stainless Steel Ball Lock Disconnects (Black/Liquid) MFL
  • 1x Stainless Steel Ball Lock Disconnects (Grey/Gas) MFL
  • 3x duotight FFL x 8mm push in
  • MKIII regulator (type 30 for CO2)
  • NEW EVABarrier 4mm ID x 8mm OD Beer & Gas Hose, cut to appropriate lengths for tap kit.
  • 1x Intertap Stainless Steel taps and Stainless Steel Short Shanks
  • Stainless Steel 304 grade font and four mounting bolts.
  • Font Fan with toggle on/off
  • CO2 Cylinder Bracket Holder
  • Clamp Tool
  • Hose Clamps
  • 5 in 1 tap and cylinder tool
  • Guard Rail
  • Drip Tray
  • Reinforced four point anchored castor wheels
  • Stainless Steel Door
  • Black reinforced plastic top


      • 600mm Wide
      • 640mm Deep
      • 840mm Height (excluding castor wheels and the height of guard rail, drip tray or font)
      • 890mm Height of the fridge part (including castor wheels but excluding the height of guard rail, drip tray or font)

      Compatible A-Type Keg Brands but not limited to:

      • 5 Seeds
      • Balmain Brewing
      • Bridge Road
      • Brookvale
      • Bundaberg & Cola
      • Canadian Club
      • Carlsberg
      • Coopers
      • Franzikaner
      • Furphy
      • Guinness
      • Hahn
      • Heineken
      • Hills Cider
      • James Boags
      • James Squire
      • Kilkenny
      • Kirin
      • Kosciuszko
      • Kronenbourg
      • Little Creatures
      • Lowenbrau
      • Magners
      • Paulaner
      • Pipsqueak
      • Rocks Brewing Co
      • Sample
      • Sapporo
      • Spaten
      • Tooheys
      • Two Birds
      • White Rabbit
      • XXXX Gold
      • Young Henrys

      Compatible D-Type Keg Brands but not limited to:

      • 4 Pines
      • Bulmers
      • Carlton Draught
      • Cascade
      • Cricketers Arms
      • Crown Lager
      • Fat Yak
      • Great Northern
      • Kingfisher
      • Konig
      • Monteiths
      • Mountain Goat
      • Peroni
      • Pure Blonde
      • Reschs Draught
      • Somersby
      • Tiger Beer
      • VB

      Please note this also comes with a cradle that goes on the back of the kegerator to hold a 4L CO2 bottle. This sticks out approx 170mm from the back of the kegerator.